[ -- Helper Here -- ]
Please Register Before Read
And Please Support And Donate Malaysia Forum

By Admin : Black Deejay

BETA CAE Systems 17.1.4 (x64)

Go down

BETA CAE Systems 17.1.4 (x64)

Post by didi7789 on Mon Feb 19, 2018 7:31 am

BETA CAE Systems 17.1.4 | 1.7 Gb
BETA CAE Systems announces the release of the version 17.1.4 of its software suite with new tools and capabilities to further augment functionality and facilitate CAE processes. This maintenance release is focused on the correction of identified issues and is addressed to those who wish to continue to use the 17.1x branch with its issues resolved and not upgrade to 18.x.

The most important enhancements and fixes implemented are listed below:

Enhancements in ANSA
- Data management
From now on, each time ANSA opens a subsystem from SPDRM, it reads along the .xml file exported by SPDRM with the subsystem's metadata and ensures that the SPDRM values prevail over those found within the file.
- Safety
Pedestrian: Only the Bonnet entities are now considered for the creation of the Rear Bonnet Reference Line instead of the complete outer trim.
- NVH Console
It is now possible to run multiple Configurations through Assembly > Run Multiple.
Known issues resolved in ANSA
- Data management
Subsystems: GEB_GN entities located in a subsystem would fail to be saved in ANSA DM.
-Connections & Assembly
In certain cases, executing Auto connect for bolt type connections could lead to unexpected termination.
- Batch Meshing
Applying the batch mesh tool could result in the inversion of some Faces' orientation.
ASCII STL: Files with more than 80 characters per line could not be read properly upon Input/ Output. Switching between decks might result in unexpected termination for databases with composite properties.
The Magnitude of Volume entities would fail to be updated after Morphing.

Enhancements in META
- Modal Response & FRF Assembly
Significant performance improvements for the calculation of FRF Assembly Animations.
- User Toolbars
Harmonized H3-05 v1.5, H3-50 v1.0.1 dummies and LSTC H3-50 dummies are now supported in the Occupant Injury Criteria Toolbar.
Known issues resolved in META
- Read Results
The EKE Kinetic Energy from Nastran SOL103 could not be read in META.
- A/LC Points
The A/LC Points of a 2d model can be found and loaded from the definitions of the respective 3d model (if already loaded).
- Managing Curve Data
The issue with incorrect X-Axis unit system transformations for Nastran curves is now fixed.
- Project Files & METADB
Unexpected termination could occur when saving a new metadb from a loaded project using "Save Visible" option.
-File Export
Unexpected termination could occur when exporting curves in ISO format.

About BETA CAE Systems 17.1.х This maintenance releases is focused on the correction of identified issues and is addressed to those who wish to continue to use the 17.1x branch with its issues resolved and not upgrade to 18.x.

What's new in BETA CAE Systems 17.1.0

A new approach has been introduced in Model Browser for organizing model data in modular assemblies. Model organization entities (i.e., subsystems, simulation models) can identify and collect internal model set-up entities.
The Entity numbering scheme has been enhanced, allowing to optionally store elements and constraints of the same id. All loaded ANSA models can now be saved as individual ANSA databases, without activating each model first. Measurement entities can now be used as annotation anchors. Accepted values of user defined attributes can now be set and modified. Post actions (functions) can now be inserted for both CAD to ANSA Translators and Translator settings in ANSA.
Operations of ANSA in TOPO menu can now be recorded and repeated on another model. New capabilities include removing joined CONs, picking and joining single bound CONs recreating the underlying surface of the involved faces, further advances geometry fixing.
It is now possible to convert the nodal to property thickness and vice versa. The relevant script function is also supported. Diagnostic checks are performed during the automatic detection of Volume entities definition.
An optimized interface has been introduced n the NVH (noise, vibration and harshness) console. Furthermore, entities such as connectors, coordinate systems, beam stiffeners and rigid bodies can now be compared within the NVH Console.

Other features include

- Kinetics: The calculation of nodal stresses/strains and modal displacements/velocities/accelerations on flexible bodies is now available.
- Morphing: A symmetric copy for parameters defined on shell elements can now be created and improvements have been made in the Design change tool for Cross sections.
- NASTRAN: The mapping of fiber orientation tensor is now supported.
- Abaqus: Fluid-structural co-simulation is now supported, as is Eulerian analysis.
- Moldex3D: the mapping of fiber orientation tensor is now supported.

About BETA CAE Systems S.A BETA CAE Systems S.A., headquartered in Thessaloniki, Greece, is a private engineering software company specialized in the development of state of the art CAE pre- and post-processing software systems. The company, focusing on meeting and exceeding customers' requirements, is committed to its mission to be the leading force in industrial CAE software solutions.

Product: BETA CAE Systems
Version: 17.1.4
Supported Architectures: x64
Language: english
System Requirements: PC
Supported Operating Systems: Windows 7even or newer
Size: 1.7 Gb






Don't forget to say Thanks !!!


Posts : 18425
Thanks : 1
Join date : 2013-01-04

View user profile

Back to top Go down

Back to top

- Similar topics

Permissions in this forum:
You cannot reply to topics in this forum